Page Comparison

1. Visit any KeyWatcher machine throughout our system.

2. Click Tap the “Start” Start button on the home screen . Login and log in with your provided username and password. This username and password should be provided by your manager.

3. The screen below will then , appear asking you to enter a new PIN. Click on Tap the top grey box to open a numerical keyboard where you will enter your new PIN.
   

   Image RemovedImage Removed

   Type and enter your new PIN using the blue number keys and click done.
   

   Image AddedImage Added

4. Tap Done.

5. Repeat these steps for the second grey box.

6. Click Tap Save.

7. Now, you are ready to enroll your fingerprints. The screen below will appear. Pick a your favorite finger of your choice to register as your “First Finger” in the system.
   

   

8. The fingerprint reader will turn red, which indicates it’s ready to scan your fingerprint for the first time. Place your finger on the reader to start the process. Repeat this step two additional times. You will see “Place Place finger on platen (# of 3) appear below your fingerprint scan.
   

   Image Removed
9. Image Added

   After you’ve completed all three scans, the screen below will appear. “Capture Complete” Capture Complete will indicate that your scans were successful.
   

   Image RemovedImage Added

10. You will now enroll a second finger. Tap Enroll Second Finger and follow the previous steps to enroll this second finger. It’s strongly recommended that you enroll a finger on your other hand.
    

    Image Added

11. If you’re content satisfied with your scans and it has registered, click on “Assigntap Assign/Update User Data. ” This allows the system has to input The system will assign your fingerprints and assign it to your user ID in the database.
    (REQUIRED): You will now enroll a second finger. Click on “Enroll Second Finger” and follow the previous steps provided for inputting your “First Finger” scans. RECOMMENDED: Use a finger on your opposite hand.

    Image Removed

12. Once you’re done with enrolling your first ( and second , if completed) fingerprints, you can click on the “<” tap the < arrow to take you back to your the home screen.

13. Logout Log out of the system and test your fingerprint by logging back in.

Changing your PIN

1. Login to Log into any KeyWatcher system.

2. The At the screen below will appear. Click on “Change , tap Change PIN.”
   

   Image RemovedImage Added

3. Tap the grey “NEW PIN” New PIN box.
   

   

4. Using the on-screen keypad, type in the new desired 4-digit PIN number. Tap “Done” Done when complete.
   

   

5. Repeat steps 3 and 4 using the “New New PIN (again)” field.

6. Tap “Save Save PIN Changes” Changes to save the new PIN.

The next time you login in, your NEW new PIN must be used.

If you would like a PDF version of this guide, you can download it here:

\uD83D\uDCCB Related articles

...