...
- Ideally, now that you have your Monster.zip, you will verify that nothing happened to break the current 'bulk import' everything worked by bulk importing it to the smartsite-test server.
Bulk import to test environment (this is very similar to the above directions)
- Login to https://smartsite-test.ucdavis.edu:8443/portal
- Navigate to a site with the Modules tool
- 'Message Center Test Course' is as good as any – you can get to it through 'Worksite Setup'
- Click on Modules in the tools menu
- Click on Manage in the menu at the top of tool screen
- Click on Export/Import on the screen that comes up
- 'Browse' to Monster.zip on your local file system.
- Click BULK IMPORT!!!
This may take quite a while – 10 minutes+- Don't worry too much about the time, as long as the browser is still thinking – again, DO NOT click 'stop', but if you do, don't worry. You can watch the import progress in the catalina.out log
- You will see errors. There will be at least one stack trace – this is normal. A lot of the errors are old screwy courses and project sites – in the case of the site 'cbb72c7d-759c-4d4c-0036-dbc95d78d383', which is BIS 1B A01 SpSu06 there is a missing file in one section on prod that was throwing an error on import – I've 'touched' this file now, so it may work better
Acceptable errors also include the 'No site found, can't unpack' – these are mostly training sites that got created on prod after we made the dump to test.