Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 29 Next »

Simple test plans are listed here for easy identification.

Set up Smartsite footer links and text content for v2.3 upgrade

SAK-377

Validate that the SmarSite footer links and text appear and function as specified:

  1. The first row of links at the bottom of the page in the gold bar are: "SmartSite", "Support & Training", "Information & Educational Technology (IET)", "University of California, Davis", and "Sakai Copyright."
  2. Selecting the SmartSite link loads the SmartSite site in the browser window. Validate by selecting My Workspace, a course or a project site and then select the SmartSite link in the footer.
  3. Selecting the Support & Training link opens a new window with the SmartSite site on the Support & Training link. Validate by checking that the SmartSite tab is selected in the top navigation, that Support & Training is bolded in the left-hand navigation, and that the Support & Training content are all displayed in the new window.
  4. Selecting the Information & Educational Technology link opens a new window with the url http://iet.ucdavis.edu/
  5. Selecting the University of California, Davis link opens a new window with the url http://www.ucdavis.edu
  6. Selecting the Sakai Copyright link opens a new window which displays the following text:
    • "Copyright 2003-2006 The Sakai Foundation."
    • "All rights reserved."
    • "Portions of Sakai are copyrighted by other parties as described in the Acknowledgments screen."
  7. The Acknowledgments screen link on the Sakai Copyright page loads this screen at the following url: http://sakai2.ucdavis.edu/portal/site/!gateway/page/!gateway-600
  8. The second row of text should display "Copyright 2003-2006 The Sakai Foundation. All rights reserved. Portions of Sakai are copyrighted by other parties as described in the Acknowledgments screen."
  9. The third row of text should display text similar to this:
    • SmartSite@UCDavis - [ucd: sakai_full_2-3-x-000] - Sakai 2.3.x - Server "hanley-dev"
    • the server name will be different

Post your test results indicating either a pass or a fail with details to: SAK-377

Support and Training link should be automatically inserted

SAK-332

This was originally a two-part test to check course sites which are either manually created or created by the system. Manual creation of a course site is no longer allowed.

Coordinate with Thomas to generate a white list file of new courses to create via the system. Thomas will provide the list of newly created courses to verify against.

Test 2: Automated Site Creation
This test is limited to users with Administrative access

  1. Select a course via the Administration Workspace whose owner is the ssbatchadmin user.
  2. Verify that the newly created course site has the Support & Training link in the left-hand navigation bar as shown in 1.Support & Training link.jpg.
  3. Select the Support & Training link and verify that the iFrame which displays course content now displays the Support and Training site as in 2.Support and Training link selected.jpg.

Post your test results indicating either a pass or a fail with details to: SAK-332

Add a link to the logo image

SAK-329

  1. Log in to SmartSite and select one of your course or project sites.
  2. Select anywhere in the active link area of the SmartSite logo in the upper left-hand corner of the screen.
  3. Verify that you are now at the SmartSite home site as shown in 1.SmartSite logo link.jpg.
  4. Selecting the Smarsite link will update your browser to point to the SmartSite site in production, so you will need to use the Back button in your browser to return to the test server.
  5. Select a course or project link in your left-hand menu and then repeat steps 2-4.
  6. Select a course or project link in your left-hand menu which you have content in and then navigate a couple of levels in as though doing a task. Repeat steps 2-4.

Post your test results indicating either a pass or a fail with details to: SAK-329

SiteInfo mailid modifications

SAK-325

This test series is designed to address multiple issues encountered in 2.1.x with manually adding users to a course via the Site Info. Original SAK-299 dealt with preventing instructors from adding invalid users to their sites, i.e., users who do not have a valid Kerberos account and therefore cannot access SmartSite. Original SAK-342 was a bug fix when selecting 'Assign each participant a role individually' when adding a valid user via Site Info.

This test requires that you enter both valid and invalid UCDavis mailIDs, email addresses, and Kerberos IDs. A mailid is just the username portion ot a UC Davis mail account without '@ucdavis.edu'. For some users, the mailID and Kerberos are the same; for others, the two are different. Invalid data would be any email account outside of the UCDavis sphere, for example, your gmail account which is invalid for UCD authentication. To come up with invalid mailIDs and Kerberos IDs, you may need to use your imagination!
To come up with valid user data for testing, you can find user accounts at http://www.ucdavis.edu/cgi-bin/whois.

  1. Log in to a course site as an instructor.
  2. Select Site Info from the course menu and then select 'Add Participants' from the Site Info tool menu.
  3. On the 'Add Participants to...' screen under the 'Username(s)' textbox, enter one or more valid UC Davis mail ids, email addresses, or kerberos ids.
  4. Select the radio button below that says 'Assign all participants to the same role'.
  5. Press the 'Continue' button and verify that the screen 'Choose a Role for Participants' is loaded and the default Roles of Instructor, Student, and Teaching Assistant are listed as options and the user names you entered are listed under Participants.
  6. Do not select any roles and press the 'Contine' button. Verify that you receive a acreen alert and are not allowed to continue.
  7. Select a role and press the 'Continue' button. Verify that the screen 'Add participant(s)...' is loaded giving you the option to send or not send an email notification.
  8. Make a notification selection (only select notify if you're using other tester accounts!) and then select 'Continue'. Verify that the screen 'Confirming Add Participant(s) to...' is loaded and that you see each of the valid users listed with their full name, kerberos id, and role.
  9. Press the 'Finish' button. Verify that the users you added are now listed in the site roster with the role that you selected for them.
  1. Repeat steps 1-3 and then select the radio button below that says 'Assign each participant a role individually'.
  2. Press the 'Continue' button and verify that the screen 'Choose a Role for Participants' is loaded and that the default Roles of Instructor, Student, and Teaching Assistant are displayed with text descriptions. Verify that each user names you entered is listed and has a drop-box under Roles.
  3. Leave one or more of the drop boxes with a role unselected and press the 'Continue' button. Verify that you receive an alert and are not allowed to continue, and that the roles you did select for some users are unchanged.
  4. Select a role for each user and press the 'Continue' button. Verify that the screen 'Add participant(s)...' is loaded giving you the option to send or not send an email notification.
  5. Make a notification selection (only select notify if you're using other tester accounts!) and then select 'Continue'. Verify that the screen 'Confirming Add Participant(s) to...' is loaded and then press the 'Finish' button. Verify that the users you added are now listed in the site roster with the role that you selected for them.

Verify what happens when you mix valid and invalid accounts

Verify what happens when you list the same user info more than once

11. You should see each of the valid users you want to add listed below with their full name, kerberos id, and role
12. Click 'Finish' - you will be returned to the original Site Info main page
13. Verify that all of the new participants appear in the Participant List below with their correct roles
14. Done!

Post your test results indicating either a pass or a fail with details to: SAK-325

Enable Database Ordering of Site Tools

SAK-328/SAK-217

To test SAK-217, SAK-261, and SAK-265, I recreated a bunch of courses via the White List Batch Job. Courses you can look at are:
AAS 010 A01 FQ 2006
AAS 010 A02 FQ 2006
AAS 010 A03 FQ 2006
..., basically any course whose owner is the ssbatchadmin user.

  • The tools for the above listed courses should be listed in alphabetical order.
  • You should be able to reorder the tools for any site via the Administration Workspace "Sites" tool.
  • If you access the "Site Info" tool in any of the sites, and then go to "Edit Tools", you shouldn't be able to remove the "Site Info" tool because it's declared as required in sakai.properties.

However,
1. If the instructor adds more tools, they are placed alphabetically at the end of the existing list, e.g., H, As, CR, EA, MC, R, SI, S&T, T&Q, then An, DB, GB, M, Sc, Sy, W, Help. Shouldn't the whole list be re-alphabetized?
2. Is there any way for an instructor (in addition to the Admin) to re-order the tools for a given course?

Feedback for multiple choice questions

SAK-370/SAK-370

  1. Create a new assessment in Tests & Quizzes. In assessment Settings, use the following Feedback settings:
  • Feedback Authoring set to Selection-Level (A,B,C...) Feedback
  • Feedback Delivery set to Immediate Feedback
  • Feedback Components Students Can See set to default of all boxes checked
  1. Create at least 2 multiple choice questions.
  2. For one question, create different feedback for each response. For the other question, create no feedback.
  3. Select only one answer as the correct response.
  4. Publish the quiz.
  5. Log in as a student and take the quiz. After completing the quiz, select the completed quiz under 'Submitted Assessments'.
  6. Verify that only the feedback to the answer you selected is displayed and that the display for the no-feedback question has no errors.
  7. Repeat this test once more with Feedback Authoring in the pre-published assessment set to Both.

Post your test results indicating either a pass or a fail with details to: SAK-370/SAK-370

  • No labels